.. cmake-manual-description: CMake Configure Log cmake-configure-log(7) ********************** .. versionadded:: 3.26 .. only:: html .. contents:: Introduction ============ CMake writes a running log, known as the *configure log*, of certain events that occur during the Configure step. The configure log does *not* contain a log of all output, errors, or messages printed while configuring a project. It is a log of detailed information about specific events, such as toolchain inspection by :command:`try_compile`, meant for use in debugging the configuration of a build tree. For human use, this version of CMake writes the configure log to the file: .. code-block:: cmake ${CMAKE_BINARY_DIR}/CMakeFiles/CMakeConfigureLog.yaml However, the *location and name of the log file may change* in future versions of CMake. Tools that read the configure log should get its location using a :ref:`configureLog ` query to the :manual:`cmake-file-api(7)`. See the `Log Versioning`_ section below for details. Log Structure ============= The configure log is designed to be both machine- and human-readable. The log file is a YAML document stream containing zero or more YAML documents separated by document markers. Each document begins with a ``---`` document marker line, contains a single YAML mapping that logs events from one CMake "configure" step, and, if the configure step finished normally, ends with a ``...`` document marker line: .. code-block:: yaml --- events: - kind: "try_compile-v1" # (other fields omitted) - kind: "try_compile-v1" # (other fields omitted) ... A new document is appended to the log every time CMake configures the build tree and logs new events. The keys of each document root mapping are: ``events`` A YAML block sequence of nodes corresponding to events logged during one CMake "configure" step. Each event is a YAML node containing one of the `Event Kinds`_ documented below. Log Versioning -------------- Each of the `Event Kinds`_ is versioned independently. The set of keys an event's log entry provides is specific to its major version. When an event is logged, the latest version of its event kind that is known to the running version of CMake is always written to the log. Tools reading the configure log must ignore event kinds and versions they do not understand: * A future version of CMake may introduce a new event kind or version. * If an existing build tree is re-configured with a different version of CMake, the log may contain different versions of the same event kind. * If :manual:`cmake-file-api(7)` queries request one or more :ref:`configureLog ` object versions, the log may contain multiple entries for the same event, each with a different version of its event kind. IDEs should write a :manual:`cmake-file-api(7)` query requesting a specific :ref:`configureLog ` object version, before running CMake, and then read the configure log only as described by the file-api reply. Text Block Encoding ------------------- In order to make the log human-readable, text blocks are always represented using YAML literal block scalars (``|``). Since literal block scalars do not support escaping, backslashes and non-printable characters are encoded at the application layer: * ``\\`` encodes a backslash. * ``\xXX`` encodes a byte using two hexadecimal digits, ``XX``. .. _`configure-log event kinds`: Event Kinds =========== Every event kind is represented by a YAML mapping of the form: .. code-block:: yaml kind: "-v" backtrace: - ": ()" checks: - "Checking for something" #...event-specific keys... The keys common to all events are: ``kind`` A string identifying the event kind and major version. ``backtrace`` A YAML block sequence reporting the call stack of CMake source locations at which the event occurred, from most-recent to least-recent. Each node is a string specifying one location formatted as ``: ()``. ``checks`` An optional key that is present when the event occurred with at least one pending :command:`message(CHECK_START)`. Its value is a YAML block sequence reporting the stack of pending checks, from most-recent to least-recent. Each node is a string containing a pending check message. Additional mapping keys are specific to each (versioned) event kind, described below. .. _`message configure-log event`: Event Kind ``message`` ---------------------- The :command:`message(CONFIGURE_LOG)` command logs ``message`` events. There is only one ``message`` event major version, version 1. .. _`message-v1 event`: ``message-v1`` Event ^^^^^^^^^^^^^^^^^^^^ A ``message-v1`` event is a YAML mapping: .. code-block:: yaml kind: "message-v1" backtrace: - "CMakeLists.txt:123 (message)" checks: - "Checking for something" message: | # ... The keys specific to ``message-v1`` mappings are: ``message`` A YAML literal block scalar containing the message text, represented using our `Text Block Encoding`_. .. _`try_compile configure-log event`: Event Kind ``try_compile`` -------------------------- The :command:`try_compile` command logs ``try_compile`` events. There is only one ``try_compile`` event major version, version 1. .. _`try_compile-v1 event`: ``try_compile-v1`` Event ^^^^^^^^^^^^^^^^^^^^^^^^ A ``try_compile-v1`` event is a YAML mapping: .. code-block:: yaml kind: "try_compile-v1" backtrace: - "CMakeLists.txt:123 (try_compile)" checks: - "Checking for something" description: "Explicit LOG_DESCRIPTION" directories: source: "/path/to/.../TryCompile-01234" binary: "/path/to/.../TryCompile-01234" cmakeVariables: SOME_VARIABLE: "Some Value" buildResult: variable: "COMPILE_RESULT" cached: true stdout: | # ... exitCode: 0 The keys specific to ``try_compile-v1`` mappings are: ``description`` An optional key that is present when the ``LOG_DESCRIPTION `` option was used. Its value is a string containing the description ````. ``directories`` A mapping describing the directories associated with the compilation attempt. It has the following keys: ``source`` String specifying the source directory of the :command:`try_compile` project. ``binary`` String specifying the binary directory of the :command:`try_compile` project. For non-project invocations, this is often the same as the source directory. ``cmakeVariables`` An optional key that is present when CMake propagates variables into the test project, either automatically or due to the :variable:`CMAKE_TRY_COMPILE_PLATFORM_VARIABLES` variable. Its value is a mapping from variable names to their values. ``buildResult`` A mapping describing the result of compiling the test code. It has the following keys: ``variable`` A string specifying the name of the CMake variable storing the result of trying to build the test project. ``cached`` A boolean indicating whether the above result ``variable`` is stored in the CMake cache. ``stdout`` A YAML literal block scalar containing the output from building the test project, represented using our `Text Block Encoding`_. This contains build output from both stdout and stderr. ``exitCode`` An integer specifying the build tool exit code from trying to build the test project. .. _`try_run configure-log event`: Event Kind ``try_run`` ---------------------- The :command:`try_run` command logs ``try_run`` events. There is only one ``try_run`` event major version, version 1. .. _`try_run-v1 event`: ``try_run-v1`` Event ^^^^^^^^^^^^^^^^^^^^ A ``try_run-v1`` event is a YAML mapping: .. code-block:: yaml kind: "try_run-v1" backtrace: - "CMakeLists.txt:456 (try_run)" checks: - "Checking for something" description: "Explicit LOG_DESCRIPTION" directories: source: "/path/to/.../TryCompile-56789" binary: "/path/to/.../TryCompile-56789" buildResult: variable: "COMPILE_RESULT" cached: true stdout: | # ... exitCode: 0 runResult: variable: "RUN_RESULT" cached: true stdout: | # ... stderr: | # ... exitCode: 0 The keys specific to ``try_run-v1`` mappings include those documented by the `try_compile-v1 event`_, plus: ``runResult`` A mapping describing the result of running the test code. It has the following keys: ``variable`` A string specifying the name of the CMake variable storing the result of trying to run the test executable. ``cached`` A boolean indicating whether the above result ``variable`` is stored in the CMake cache. ``stdout`` An optional key that is present when the test project built successfully. Its value is a YAML literal block scalar containing output from running the test executable, represented using our `Text Block Encoding`_. If ``RUN_OUTPUT_VARIABLE`` was used, stdout and stderr are captured together, so this will contain both. Otherwise, this will contain only the stdout output. ``stderr`` An optional key that is present when the test project built successfully and the ``RUN_OUTPUT_VARIABLE`` option was not used. Its value is a YAML literal block scalar containing output from running the test executable, represented using our `Text Block Encoding`_. If ``RUN_OUTPUT_VARIABLE`` was used, stdout and stderr are captured together in the ``stdout`` key, and this key will not be present. Otherwise, this will contain the stderr output. ``exitCode`` An optional key that is present when the test project built successfully. Its value is an integer specifying the exit code, or a string containing an error message, from trying to run the test executable. .. _`find configure-log event`: Event Kind ``find`` ------------------- The :command:`find_file`, :command:`find_path`, :command:`find_library`, and :command:`find_program` commands log ``find`` events. There is only one ``find`` event major version, version 1. .. _`find-v1 event`: ``find-v1`` Event ^^^^^^^^^^^^^^^^^ .. versionadded:: 4.1 A ``find-v1`` event is a YAML mapping: .. code-block:: yaml kind: "find-v1" backtrace: - "CMakeLists.txt:456 (find_program)" mode: "program" variable: "PROGRAM_PATH" description: "Docstring for variable" settings: SearchFramework: "NEVER" SearchAppBundle: "NEVER" CMAKE_FIND_USE_CMAKE_PATH: true CMAKE_FIND_USE_CMAKE_ENVIRONMENT_PATH: true CMAKE_FIND_USE_SYSTEM_ENVIRONMENT_PATH: true CMAKE_FIND_USE_CMAKE_SYSTEM_PATH: true CMAKE_FIND_USE_INSTALL_PREFIX: true names: - "name1" - "name2" candidate_directories: - "/path/to/search" - "/other/path/to/search" - "/path/to/found" - "/further/path/to/search" searched_directories: - "/path/to/search" - "/other/path/to/search" found: "/path/to/found/program" The keys specific to ``find-v1`` mappings are: ``mode`` A string describing the command using the search performed. One of ``file``, ``path``, ``program``, or ``library``. ``variable`` The variable to which the search stored its result. ``description`` The documentation string of the variable. ``settings`` Search settings active for the search. ``SearchFramework`` A string describing how framework search is performed. One of ``FIRST``, ``LAST``, ``ONLY``, or ``NEVER``. See :variable:`CMAKE_FIND_FRAMEWORK`. ``SearchAppBundle`` A string describing how application bundle search is performed. One of ``FIRST``, ``LAST``, ``ONLY``, or ``NEVER``. See :variable:`CMAKE_FIND_APPBUNDLE`. ``CMAKE_FIND_USE_CMAKE_PATH`` A boolean indicating whether or not CMake-specific cache variables are used when searching. See :variable:`CMAKE_FIND_USE_CMAKE_PATH`. ``CMAKE_FIND_USE_CMAKE_ENVIRONMENT_PATH`` A boolean indicating whether or not CMake-specific environment variables are used when searching. See :variable:`CMAKE_FIND_USE_CMAKE_ENVIRONMENT_PATH`. ``CMAKE_FIND_USE_SYSTEM_ENVIRONMENT_PATH`` A boolean indicating whether or not platform-specific environment variables are used when searching. See :variable:`CMAKE_FIND_USE_SYSTEM_ENVIRONMENT_PATH`. ``CMAKE_FIND_USE_CMAKE_SYSTEM_PATH`` A boolean indicating whether or not platform-specific CMake variables are used when searching. See :variable:`CMAKE_FIND_USE_CMAKE_SYSTEM_PATH`. ``CMAKE_FIND_USE_INSTALL_PREFIX`` A boolean indicating whether or not the install prefix is used when searching. See :variable:`CMAKE_FIND_USE_INSTALL_PREFIX`. ``names`` The names to look for the queries. ``candidate_directories`` Candidate directories, in order, to look in during the search. ``searched_directories`` Directories, in order, looked at during the search process. ``found`` Either a string representing the found value or ``false`` if it was not found. ``search_context`` A mapping of variable names to search paths specified by them (either a string or an array of strings depending on the variable). Environment variables are wrapped with ``ENV{`` and ``}``, otherwise CMake variables are used. Only variables with any paths specified are used. ``package_stack`` An array of objects with paths which come from the stack of paths made available by :command:`find_package` calls. ``package_paths`` The paths made available by :command:`find_package` commands in the call stack. .. _`find_package configure-log event`: Event Kind ``find_package`` --------------------------- .. versionadded:: 4.1 The :command:`find_package` command logs ``find_package`` events. There is only one ``find_package`` event major version, version 1. .. _`find_package-v1 event`: ``find_package-v1`` Event ^^^^^^^^^^^^^^^^^^^^^^^^^ A ``find_package-v1`` event is a YAML mapping: .. code-block:: yaml kind: "find_package-v1" backtrace: - "CMakeLists.txt:456 (find_program)" name: "PackageName" components: - name: "Component" required: true found: true configs: - filename: PackageNameConfig.cmake kind: "cmake" - filename: packagename-config.cmake kind: "cmake" version_request: version: "1.0" version_complete: "1.0...1.5" min: "INCLUDE" max: "INCLUDE" exact: false settings: required: "optional" quiet: false global: false policy_scope: true bypass_provider: false hints: - "/hint/path" names: - "name1" - "name2" search_paths: - "/search/path" path_suffixes: - "" - "suffix" registry_view: "HOST" paths: CMAKE_FIND_USE_CMAKE_PATH: true CMAKE_FIND_USE_CMAKE_ENVIRONMENT_PATH: true CMAKE_FIND_USE_SYSTEM_ENVIRONMENT_PATH: true CMAKE_FIND_USE_CMAKE_SYSTEM_PATH: true CMAKE_FIND_USE_INSTALL_PREFIX: true CMAKE_FIND_USE_PACKAGE_ROOT_PATH: true CMAKE_FIND_USE_CMAKE_PACKAGE_REGISTRY: true CMAKE_FIND_USE_SYSTEM_PACKAGE_REGISTRY: true CMAKE_FIND_ROOT_PATH_MODE: "BOTH" candidates: - path: "/path/to/config/PackageName/PackageNameConfig.cmake" mode: "config" reason: "insufficient_version" - path: "/path/to/config/PackageName/packagename-config.cmake" mode: "config" reason: "no_exist" found: path: "/path/to/config/PackageName-2.5/PackageNameConfig.cmake" mode: "config" version: "2.5" The keys specific to ``find_package-v1`` mappings are: ``name`` The name of the requested package. ``components`` If present, an array of objects containing the fields: ``name`` The name of the component. ``required`` A boolean indicating whether the component is required or optional. ``found`` A boolean indicating whether the component was found or not. ``configs`` If present, an array of objects indicating the configuration files to search for. ``filename`` The filename of the configuration file. ``kind`` The kind of file. Either ``cmake`` or ``cps``. ``version_request`` An object indicating the version constraints on the search. ``version`` The minimum version required. ``version_complete`` The user-provided version range. ``min`` Whether to ``INCLUDE`` or ``EXCLUDE`` the lower bound on the version range. ``max`` Whether to ``INCLUDE`` or ``EXCLUDE`` the upper bound on the version range. ``exact`` A boolean indicating whether an ``EXACT`` version match was requested. ``settings`` Search settings active for the search. ``required`` The requirement request of the search. One of ``optional``, ``optional_explicit``, ``required_explicit``, ``required_from_package_variable``, or ``required_from_find_variable``. ``quiet`` A boolean indicating whether the search is ``QUIET`` or not. ``global`` A boolean indicating whether the ``GLOBAL`` keyword has been provided or not. ``policy_scope`` A boolean indicating whether the ``NO_POLICY_SCOPE`` keyword has been provided or not. ``bypass_provider`` A boolean indicating whether the ``BYPASS_PROVIDER`` keyword has been provided or not. ``hints`` An array of paths provided as ``HINTS``. ``names`` An array of package names to use when searching, provided by ``NAMES``. ``search_paths`` An array of paths to search, provided by ``PATHS``. ``path_suffixes`` An array of suffixes to use when searching, provided by ``PATH_SUFFIXES``. ``registry_view`` The ``REGISTRY_VIEW`` requested for the search. ``paths`` Path settings active for the search. ``CMAKE_FIND_USE_CMAKE_PATH`` A boolean indicating whether or not CMake-specific cache variables are used when searching. See :variable:`CMAKE_FIND_USE_CMAKE_PATH`. ``CMAKE_FIND_USE_CMAKE_ENVIRONMENT_PATH`` A boolean indicating whether or not CMake-specific environment variables are used when searching. See :variable:`CMAKE_FIND_USE_CMAKE_ENVIRONMENT_PATH`. ``CMAKE_FIND_USE_SYSTEM_ENVIRONMENT_PATH`` A boolean indicating whether or not platform-specific environment variables are used when searching. See :variable:`CMAKE_FIND_USE_SYSTEM_ENVIRONMENT_PATH`. ``CMAKE_FIND_USE_CMAKE_SYSTEM_PATH`` A boolean indicating whether or not platform-specific CMake variables are used when searching. See :variable:`CMAKE_FIND_USE_CMAKE_SYSTEM_PATH`. ``CMAKE_FIND_USE_INSTALL_PREFIX`` A boolean indicating whether or not the install prefix is used when searching. See :variable:`CMAKE_FIND_USE_INSTALL_PREFIX`. ``CMAKE_FIND_USE_CMAKE_PACKAGE_REGISTRY`` A boolean indicating whether or not to search the CMake package registry for the package. See :variable:`CMAKE_FIND_USE_PACKAGE_REGISTRY`. ``CMAKE_FIND_USE_SYSTEM_PACKAGE_REGISTRY`` A boolean indicating whether or not to search the system CMake package registry for the package. See :variable:`CMAKE_FIND_USE_SYSTEM_PACKAGE_REGISTRY`. ``CMAKE_FIND_ROOT_PATH_MODE`` A string indicating the root path mode in effect as selected by the ``CMAKE_FIND_ROOT_PATH_BOTH``, ``ONLY_CMAKE_FIND_ROOT_PATH``, and ``NO_CMAKE_FIND_ROOT_PATH`` arguments. ``candidates`` An array of rejected candidate paths. Each element contains the following keys: ``path`` The path to the considered file. In the case of a dependency provider, the value is in the form of ``dependency_provider::``. ``mode`` The mode which found the file. One of ``module``, ``cps``, ``cmake``, or ``provider``. ``reason`` The reason the path was rejected. One of ``insufficient_version``, ``no_exist``, ``ignored``, ``no_config_file``, or ``not_found``. ``message`` If present, a string describing why the package is considered as not found. ``found`` If the package has been found, information on the found file. If it is not found, this is ``null``. Keys available: ``path`` The path to the module or configuration that found the package. In the case of a dependency provider, the value is in the form of ``dependency_provider::``. ``mode`` The mode that considered the path. One of ``module``, ``cps``, ``cmake``, or ``provider``. ``version`` The reported version of the package. ``search_context`` A mapping of variable names to search paths specified by them (either a string or an array of strings depending on the variable). Environment variables are wrapped with ``ENV{`` and ``}``, otherwise CMake variables are used. Only variables with any paths specified are used. ``package_stack`` An array of objects with paths which come from the stack of paths made available by :command:`find_package` calls. ``package_paths`` The paths made available by :command:`find_package` commands in the call stack.